Products

product-light-01

PLANTILIUM PHG-150

Description:

The PHG-150 is a highbay-style plant growth light with utilises LEDs in four fixed light wavelengths. The luminaire is convection cooled and has no moving parts. This equates to a completely silent operation. The PHG-150 operates over a wide range of mains supply voltages, and features a high radiant light output with low power consumption, low heat generation and a high electrical-to-optical conversion efficiency.

Download data sheet

Physical Specifications:

Height (total): 398mm
Height (hanging point to optical plane): 277mm
Diameter 270mm
Weight (hanging): 3.8kg (8.4lb)
Weight (shipping): 5.0kg (11.0lb)
Shipping Carton size: 458mm x 278mm x 278mm (18” x 11” x 11”)

Environmental Specifications:

Environmental Protection: IP56
Storage Temperature Range: -20°C ~ 70°C
Operating Temperature Ranger -20°C ~ 45°C
Heatsink Temperature Rise 26°C (typ) above ambient

Electrical Specifications:

Mains Voltage Range: 100Vac ~ 277Vac, 50/60Hz
Power Consumption: 138 watts (typ.), 145 watts (max)
Power Factor: Greater than 0.95
Maximum lamps per circuit: (to avoid circuit-breaker tripping At turn-on) : 14 lamps (10A circuit); 21 lamps (15A circuit); 28 lamps (20A circuit)

Radiant Output Specifications:

Radiation Pattern: 60° conical (approx) – See graphs.
Radiant Spectrum: Four LED wavelengths (two blue, two red) – See graphs.
PAR Power: (Photosynthetically Active Radiation power) 38.5 watts (average of twelve units)
PPF-PAR: (Photosynthetic Photon Flux – PAR) 197.5 μmols/sec (average of twelve units)
Red-Blue Ratio: 4.3-to-1 (power ratio); 6.2-to-1 (PPF-PAR ratio)
graph-01

Figure 1. PHG-150 Beam Spread

graph-02

Figure 2. PHG-150 Outline Diagram

graph-03

Figure 3. PHG-150 Spectral Output

product-light-02

PLANTILIUM PHG-18

Description:

The PHG-18 utilises a PAR38 form factor with an Edison screw (E26) base. The unit produces four fixed light wavelengths. The luminaire is convection cooled and has no moving parts. This equates to silentl operation. The PHG-18 operates over a wide range of mains supply voltages, and features tight optical beam control with high radiant light output, low power consumption, and high electrical-to-optical conversion efficiency.

Download data sheet

Physical Specifications:

Height (total): 125mm
Diameter 120mm
Weight (hanging): 0.50kg (18oz)
Weight (hanging): 0.72kg (25oz)
Shipping Carton size: 130mm x 130mm x 150mm (5” x 5” x 6”)

Environmental Specifications:

Environmental Protection: IP55
Note: Installed IP rating depends on lampholder type.
Storage Temperature Range: -20° C ~ 70°C
Operating Temperature Range: -20° C ~ 45°C
Heatsink Temperature Rise: 31°C (typ) above ambient

Electrical Specifications:

Mains Voltage Range: 100Vac ~ 277Vac, 50/60Hz
Power Consumption: 18 watts (typ.), 19 watts (max)
Рower factor: Greater than 0.90
Maximum lamps per circuit: (to avoid circuit-breaker tripping At turn-on) 80 lamps (230V, 10A circuit); 120 lamps (230V, 15A circuit);
160 lamps (230V, 20A circuit)

Radiant Output Specifications:

Radiation Pattern: 40°
conical (approx)
Radiant Spectrum: Four LED wavelengths (two blue, two red)
PAR Power: 4.2 watts (Photosynthetically Active Radiation power)
PPF-PAR: 21 μmols/sec
Red-Blue Ratio: 4.0-to-1 (power ratio); 5.7-to-1 (PPF-PAR ratio)
graph-01-1

Figure 1. PHG-18 Beam Spread

graph-02-2

Figure 2. PHG-18 Outline Diagram

graph-03-3

Figure 3. PHG-18 Spectral Output